Long-term leaching of uranium from different waste matrices

A semi-dynamic leaching test was carried out for metallurgical wastes and ore samples from the uranium and copper mining industry over a 142 day period using distilled water and 0.1N NaNO(3) as solvents. Laser fluorimetry was used as the analytical technique to determine the total uranium content in the leachates. The cumulative leach fraction (CLF) of uranium release from the samples was calculated to be 0.22, 0.22, 0.07 and 0.39% for rock, uranium tailings, copper kinker ash samples and copper tailings respectively using distilled water as solvent and 0.31, 0.27, 0.05 and 0.59% for the same matrices using 0.1N NaNO(3). The release of mobile uranium fraction was very slow, being faster in the initial stage and then attained a near steady state condition. The diffusion coefficient and bulk release of uranium from the samples have been calculated. The processes governing the release of uranium from these matrices have been identified to be surface wash-off and diffusion. Hence the use of weak solvents (leach out the mobile/exchangeable fraction of uranium) under semi-dynamic conditions aids the determination of leaching parameters and identification of the leaching mechanism for mobile uranium fraction from different matrices by slow leaching processes.     

Organochlorine insecticide residues in Ganga river water near Farrukhabad,India

Multiple residues of organochlorine insecticides were monitored in Ganga river water in the district of Farrukhabad in northern Indian for one year (1991–1992). Almost all the samples were found to be contaminated with residues of HCH and DDT. Residues of aldrin, endosulfan and heptachlor were also detected in a larger number of samples. Alpha-HCH, pp-DDT and alpha-endosulfan were found to dominate over the other isomers of HCH, DDT and endosulfan, respectively. Enhanced percentage of beta-HCH suggests accumulation of this isomer in the aquatic environment. The average concentration of aldrin was more than that of dieldrin. Aldrin residues often exceeded the WHO guideline value for drinking water and the concentration of heptachlor occasionally exceeded the specified limits.     

Behavior of acetamiprid,azoxystrobin, pyraclostrobin,and lambda-cyhalothrin in/on pomegranate tissues

Environmental Science and Pollution Research - Pomegranate crop is affected by several insect pests and requires usage of a large number of pesticides, but the information on their behavior in...     

Residual behavior and risk assessment of flubendiamide on tomato at different agro-climatic conditions in India

Supervised field trials were conducted at four different agro-climatic zones in India to evaluate the dissipation pattern and risk assessment of flubendiamide on tomato. Flubendiamide 480 SC was sprayed on tomato at 48 and 96 g active ingredient (a.i.) ha^?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10, 15, and 20 days after treatment. Quantification of residues was done on a high-performance liquid chromatography (HPLC) device with a photo diode array detector. The limit of quantification (LOQ) of this method was found to be 0.01 mg kg^?1 while limit of detection (LOD) being 0.003 mg kg^?1. Residues of flubendiamide were found below the determination limit of 0.01 mg kg^?1 in 20 days at both the dosages in all the locations. The half-life of flubendiamide at an application rate of 48 g a.i.?ha^?1 varied from 0.33 to 3.28 days and at 48-g a.i. ranged from 1.21 to 3.00 days. On the basis of data generated under the All India Network Project on Pesticide Residues, a preharvest interval (PHI) of 1 day has been recommended, and the flubendiamide 480 SC has been registered for its use on tomato by the Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of flubendiamide on tomato has been fixed by the Ministry of Health and Family Welfare, Government of India under Food Safety Standard Authority of India, as 0.07 μg g^?1 after its risk assessment.     

Study of Thermo-Mechanical and Morphological Behaviour of Biodegradable PLA/PBAT/Layered Silicate Blend Nanocomposites

Poly (lactic acid) (PLA) and poly (butylene adipate-co-terephthalate) (PBAT) blend nanocomposites were prepared using melt blending technique followed by compression moulding. The blend nanocomposites were prepared with a variation of PBAT loading along with maleic anhydride and benzoyl peroxide ranging from 5 to 20 wt% along with two different commercially available nanoclays cloisite 93A and cloisite 30B (C30B) at 3 wt% loading. The maleic anhydride and benzoyl peroxide were used during the melt blending of the blend nanocomposites as a compatibilizer and as an accelerator respectively. Maleic anhydride used to enhance the compatibility of the PLA/PBAT blend and as well as the uniform adhesion of the nanoclays with them. The properties and characterizations of PLA matrix and the PLA/PBAT blend nanocomposites have been studied. The tensile strength, % elongation and impact strength increased with the preparation of PLA/PBAT blend nanocomposites as compared with PLA matrix. PLA/PBAT/C30B blend nanocomposites exhibited optimum tensile strength at 15 wt% of PBAT loading. Differential scanning calorimetry and thermogravimetric analysis also showed improved thermal properties as compared with virgin PLA. The wide angle X-ray diffraction studies indicated an increase in d-spacing in PLA/PBAT/C30B blend nanocomposite thus revealing intercalated morphology.     

Assessment of groundwater quality in Puri City, India: an impact of anthropogenic activities

Puri City is situated on the east coast of India and receives water supply only from the groundwater sources demarcated as water fields. The objective of this paper is to assess and evaluate the groundwater quality due to impact of anthropogenic activities in the city. Groundwater samples were collected from the water fields, hand pumps, open wells, and open water bodies during post-monsoon 2006 and summer 2007. Groundwater quality was evaluated with drinking water standards as prescribed by Bureau of Indian Standards and Environmental Protection Agency to assess the suitability. The study indicated seasonal variation of water-quality parameters within the water fields and city area. Groundwater in the water fields was found to be suitable for drinking after disinfection. While in city area, groundwater quality was impacted by onsite sanitary conditions. The study revealed that groundwater quality was deteriorated due to the discharge of effluent from septic tanks, soak pits, pit latrines, discharges of domestic wastewater in leaky drains, and leachate from solid waste dumpsite. Based on observed groundwater quality, various mitigation measures were suggested to protect the water fields and further groundwater contamination in the city.     

The role of disinfectants and sanitizers during COVID-19 pandemic: advantages and deleterious effects on humans and the environment

Environmental Science and Pollution Research - Disinfectants and sanitizers are essential preventive agents against the coronavirus disease 2019 (COVID-19) pandemic; however, the pandemic crisis...     

Emission of N2O on pulse–rice crop rotation in upland

The Seasonally Integrated Flux (SIF) of N₂O emission during pulse cultivation in Rabi season (Season-I: December to April) in rain-fed uplands of Orissa, was found to be 17.7 ± 0.07, 18.7 ± 0.16 and 43.3 ± 0.14 gha^?1 for horse gram (HG), black gram (BG) and green gram (GG) respectively. During the subsequent Rabi season (Season-II), the SIF of N₂O for BG and GG cultivated in the same fields were 20.9 ± 0.24 and 38.0 ± 0.42 gha^?1 respectively. Similarly SIF values during rice cultivation with different cultivars have also been calculated to be in the range ?20.05 ± 0.33 to 21.98 ± 0.29. Statistical analysis showed good correlation of N₂O emission with climatic and soil parameters like temperature, nutrient N and organic matter in soil during pulse cultivation. Multivariate analysis was carried out to factorize the results obtained. Using student ‘t’ test, the N₂O emission was observed to be similar for two consecutive Rabi seasons for pulses like BG and GG.     

Development of an analytical method for analysis of flubendiamide, des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare?1 were 0.83 and 1.68 mg kg?1, respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha?1 were below detectable level (BDL, < 0.01 mg kg?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Review of fluoride removal from drinking water

Fluoride in drinking water has a profound effect on teeth and bones. Up to a small level (1–1.5 mg/L) this strengthens the enamel. Concentrations in the range of 1.5–4 mg/L result in dental fluorosis whereas with prolonged exposure at still higher fluoride concentrations (4–10 mg/L) dental fluorosis progresses to skeletal fluorosis. High fluoride concentrations in groundwater, up to more than 30 mg/L, occur widely, in many parts of the world. This review article is aimed at providing precise information on efforts made by various researchers in the field of fluoride removal for drinking water. The fluoride removal has been broadly divided in two sections dealing with membrane and adsorption techniques. Under the membrane techniques reverse osmosis, nanofiltration, dialysis and electro-dialysis have been discussed. Adsorption, which is a conventional technique, deals with adsorbents such as: alumina/aluminium based materials, clays and soils, calcium based minerals, synthetic compounds and carbon based materials. Studies on fluoride removal from aqueous solutions using various reversed zeolites, modified zeolites and ion exchange resins based on cross-linked polystyrene are reviewed. During the last few years, layered double oxides have been of interest as adsorbents for fluoride removal. Such recent developments have been briefly discussed.